CERAMIC COATING CURING PROCESS

System X® is extremely slick, this means most things will dissolve and be pulled off by System X’s self-cleaning effect. Use water or a little vinegar to remove bird droppings, bugs, and tree sap. Followed by wiping it off with a soft edge-less microfiber towel.

For best results the car should be washed on a bi-weekly basis to avoid excessive contamination build-up. Use only recommended mild soaps. Avoid high volume brush style car washes, high PH detergent style cleaners, and bug/tar removers. Avoid washing in direct sunlight to minimize streaking and water spotting. Wash from the top down leaving the dirtiest sections for last to avoid cross-contamination. Use separate soap.

Standard home washing

• Use a foam gun (optimal) or microfiber wash mitt to soap down the car. Rinse it off with a pressure washer (optimal) or hose. Dry with clean microfiber towels.

Spray ‘n wash self car washes

• Select the high-pressure soap. Soap the car down (never use the provided brushes especially on the paint!). Rinse car off with the high-pressure rinse. Dry with clean microfiber towels.

• System X Renew™ is a great drying aid. Using Renew™ and one damp microfiber to first dry the vehicle then follow by using the second microfiber to finish drying. This process will give you the best results.
• Always dry completely and never leave to “air” dry. Tap water contains minerals that may leave deposits creating water spots.
• Only use quality microfiber towels for best results and avoid aggressive wiping, allowing the material to absorb the water.

• Never use aggressive products to polish the coating or remove surface contamination.
• Never use excessive force to remove spots.
• Bird droppings, tar, sap, etc. should be removed as soon as possible to avoid temporary staining or hardening on the coating. Any staining left behind from bird droppings will break down over a few days without affecting the coating.

Do not wax the coating, many products contain solvents and abrasives.  System X Renew™ is the recommended maintenance and aftercare product. Ask your local installer about purchasing System X Renew™ during your visit or order online.

Annual Inspections are the recommended process for ensuring the coating is maintained and care for the vehicle is properly executed. Annual inspections should be carried out by an approved applicator within 30 days before the anniversary date of the last service to ensure peak performance and warranty validity. Although durable and long-lasting, annual inspections ensure maximum gloss and protection from System X® coatings